凝胶型99Mo-99mTc发生器研究现状

与裂变型⁹⁹Mo-^99mTc发生器相比，凝胶型⁹⁹Mo-^99mTc发生器制备^99mTc具有工艺简单、产生的放射性废物容易处理、对环境影响小等优点。本文主要论述了凝胶型⁹⁹Mo-^99mTc发生器与裂变型⁹⁹Mo-99mTc发生器的区别，堆照生产⁹⁹Mo原料和凝胶材料的研究进展，凝胶结构以及凝胶组分等多种条件因素对凝胶型⁹⁹Mo-^99mTc发生器性能的影响等，并对低比活度⁹⁹Mo生产^99mTc的研究进展进行综述。     

Evaluation of adult and offspring thiamine deficiency in salmonine species from Lake Ontario

Thiamine Deficiency Complex (TDC) is an ongoing problem impacting salmonine health in various waterbodies, including Lake Ontario. The prevalence of TDC has been variable and explanations for differences are limited. In the current study, thiamine concentrations were measured in eggs, liver tissue, and muscle tissue sampled from brown trout (Salmo trutta), Chinook salmon (Oncorhynchus tshawytscha), coho salmon (O. kisutch), lake trout (Salvelinus namaycush), and steelhead trout (O. mykiss) that were collected from Lake Ontario and its surrounding tributaries. The occurrence of TDC was measured for each species based on TDC-induced offspring mortality rates under laboratory conditions. TDC-induced offspring mortality was observed for all species except brown trout. For affected species, egg free thiamine (Th) was consistently low compared to lake trout collected from Lake Superior that are considered thiamine replete. In addition, species with the lowest percentages of Th in their eggs were the most susceptible to TDC, suggesting that limited thiamine reserves in the form of Th may cause TDC-induced offspring mortality. Lastly, our results show that egg thiamine concentrations have yearly variation and increased for all species throughout the study. Reasons for such variation are undetermined; but, if egg thiamine concentrations continue to increase, the impacts of TDC on these salmonine species may lessen. Future monitoring is needed for determining if thiamine concentrations are increasing and the potential impacts that may have on the entire Lake Ontario fishery.     

基于改进耦合增强随机共振的滚动轴承故障诊断

针对强背景噪声下经典随机共振方法对滚动轴承故障特征提取效果差的问题,提出了一种基于改进耦合增强随机共振的滚动轴承故障诊断方法。首先,利用一个定参双稳系统和一个变参双稳系统构成耦合随机共振系统,外部输入直接作用于定参双稳系统;然后,通过调节变参双稳系统参数和耦合系数实现耦合系统的随机共振控制,并借助遗传算法实现控制参数的自适应选取。实验和工程应用验证了所提方法的有效性和优越性。     

Numerical modelling of a low power non-transferred arc plasma reactor for methane conversion

Thermal flow characteristics and the methane conversion reaction in a low power arc plasma reactor for efficient storage and transport of methane, which is the main component of shale gas, were simulated. The temperature and velocity distributions were calculated according to the type of discharge gases and arc current level by a self-developed magnetohydrodynamics (MHD) code and a commercial ANSYS-FLUENT code; the transport of chemical species was analyzed as including the chemical reactions of methane conversion. The simulated results were verified by the comparison of calculated and measured arc voltages with permissible low error as under 4%. Three C₂ hydrocarbon gases with ethane (C₂H₆), ethylene (C₂H₄), and acetylene (C₂H₂) were selected as the converted species of methane from experimental data. The mass fraction of C₂ hydrocarbons and hydrogen as the product of the conversion reaction at the reactor was also calculated. Those values show good agreement with the actual experimental results in that the major conversion reaction occurred in C₂H₂ and hydrogen, and the conversions to C₂H₆, C₂H₄, and hydrogen were minor reactions of methane pyrolysis conversion.     

Effect of preparation method on physicochemical properties and catalytic performances of LaCoO_3 perovskite for CO oxidation

Perovskite oxides LaCoO_3 prepared by templating, co-precipitation and sol-gel method with different complexants were systematically characterized and its catalytic performances for CO oxidation were investigated. The samples were characterized by X-ray diffraction, thermogravimetry analysis and differential scanning calorimetry, N_2 physisorption, transmission electron microscopy, temperature program reduction of hydrogen, temperature program desorption of oxygen and X-ray photoelectron spectroscopy measurement, results of which show that the properties of LaCoO_3, such as surface morphology, surface area, surface compositions, redox capability, oxygen vacancy, as well as the calcination temperature and formation mechanism, depend intimately on the preparation method. Catalytic tests indicate that the sample prepared by carbon templating method shows the best activity for CO oxidation, with full CO conversion obtained at 135 ℃. In particular, the catalyst can be activated and significant increase of activity can be obtained with the increase of reaction time. The cyclic and longterm stability of catalysts were discussed and compared.     

An improved cuckoo search algorithm for the problem of electric distribution network reconfiguration

Power loss reduction has an important role in operating electric distribution network system. There are a lot of methods for reduction power loss such as capacitor placement, distributed generation placement and electric distribution network reconfiguration (EDNR). Among these methods, the EDNR is an efficient technique to reduce power loss due to without taking any costs. However, the EDNR problem is a nonlinear, discrete problem and lots of extreme points. Therefore, it is necessary to have efficient methods for solving the EDNR problem. In this paper, an improved cuckoo search algorithm (ICSA) is proposed for solving the EDNR problem. In which, based on disadvantages of exploration and exploitation process of cuckoo search algorithm (CSA) for solving the EDNR problem, a local search mechanism is added to exploit candidate solutions existing around the current best solution. The calculated results on the simple distribution networks to complex distribution networks show that ICSA has ability for finding the global optimal solution with much smaller iterations and better quality of obtained solution compared with CSA and some other improved versions of CSA. The performance comparisons with other existing methods available in previous studies and the software of Power System Simulator/Advanced Distribution Engineering Productivity Tool (PSS/ADEPT) also lead to the better electric distribution network configuration with smaller total power losses. As a result, ICSA is a potential and reliable method for solving the EDNR problems.     

基于同轴图像传感的激光焊接过程质量监测技术

针对激光焊接过程中由于参数不匹配、装配误差等原因造成的焊接过程不稳定等焊接缺陷，基于同轴图像传感技术，建立起一套激光焊接过程中的质量在线监测系统，对焊接过程中的熔池图像进行了采集分析及其熔池特征信息的提取. 结果表明，在激光功率为1 500 W的不等厚不锈钢薄板激光焊接试验条件下，焊接过程中的不稳定、下塌缺陷以及焊偏现象与熔池形状各特征信息变化具有一定的相关性. 结合BP神经网络算法对所提特征信息进行分类、识别，基于LabVIEW软件平台，可实现相应缺陷的自动化识别及报警功能.     

Formation of radioactive cesium microparticles originating from the Fukushima Daiichi Nuclear Power Plant accident: characteristics and perspectives

ABSTRACT

Following identification of radioactive Cs microparticles (CsMPs) in aerosol samples from the Fukushima Daiichi Nuclear Power Plant (FDNPP), numerous reports on CsMPs have been published. This paper reviews recent progress in the measurement and characterization of CsMPs by advanced analytical techniques, including advanced transmission electron microscopy (TEM) and synchrotron X-ray analysis. These analyses revealed that the CsMPs contained Si, Fe, Zn, Cs, and minor quantities of U together with some fission products. Uranium in the CsMPs was identified as being in the form of uraninite and (U,Zr)O₂. Detailed advanced TEM analysis has clarified some of the processes resulting in the alteration of constituents of the nuclear fuels and containment vessel materials during this severe accident. In addition, a detailed report on the elemental compositions and structures of the fuel debris fragments collected inside and outside of the primary containment vessel²⁵ highlighted the fact that the fuel debris fragments contained nanoparticles with the U and Zr components having similar structures to that of the CsMPs. This similarity in structures has stimulated further research on the structure and elemental constituents, especially for U and Zr in the CsMPs, and has opened up new avenues for studying the chemical characteristics of the fuel debris.     

碳酸盐岩岩溶储层多井评价方法及地质应用

多井评价是建立在单井精细解释对比分析基础上的预测储层及含油气性平面分布规律的技术方法,而常规测井资料无法区分碳酸盐岩岩溶储层,因而利用多井评价结果确定岩溶发育程度在平面上的分布规律就显得十分重要。为此,在岩心标定成像测井的基础上,对四川盆地高石梯—磨溪地区15口井的成像测井岩溶发育特征进行分析,建立了中二叠统茅口组岩溶发育各分带的标准成像图版,利用交会图及直方图分析各分带的常规测井响应特征,在此基础上形成了电成像测井刻度常规测井识别岩溶发育带的新方法。研究结果表明:①高石梯—磨溪地区茅口组岩溶带自上而下可划分为风化壳残积带、垂直渗流岩溶带、水平潜流岩溶带以及受岩溶作用较弱的基岩;②风化壳残积带在成像测井图像显示为"暗—亮—暗"条带状模式,垂直渗流岩溶带为垂直线状与暗色斑状组合模式,水平潜流岩溶带为水平线状—层状与斑状组合模式,基岩整体显示为亮色块状模式偶见线状或斑状特征;③有效储层主要发育在垂直渗流带和水平潜流带的顶部;④该区茅口组岩溶发育主要受裂缝发育控制,而裂缝发育又与断层关系密切。结论认为,该新方法对碳酸盐岩岩溶储层的多井评价具有普遍适用性,为四川盆地中二叠统风险探井的部署提供了技术支撑。